Disclosure: We may earn commissions if you purchase products after clicking on a link from our site.

Are you looking for the best table saws? Are you overwhelmed with the brands and models of table saws available on the market? In this guide, we not only review some of the best table saws on the market today but also discuss the important features to look for when choosing a table saw.


1. DEWALT Table Saw (DWE7491RS)

The DEWALT DWE7491RS has 32 1/2-inch rip capacity and a rolling stand that has a rack and pinion fence system which makes fence adjustments fast, smooth and accurate. The rolling stand can be easily set up and taken down with good stability and it features large heavy-duty wheels. This 32 1/2 inch rip capacity cuts a variety of shelving and trim materials.

This table saw also has a 15 amp motor that can cut pressure-treated lumber and hardwoods. The DWE7491RS also features a 3 1/8-inch depth of cut at 90 degrees and 2 1/4-inch at 45 degrees.









          What We Like:

  • Rip Capacity of 32 1/2-inch
  • 15 Amp Motor








2. DEWALT Table Saw (DWE7485)

The DEWALT DWE7485 features 24.5 inches rip capacity that can rip 4×8 plywood or OSB sheets. A powerful 15 amp motor with a speed of 5,800 rpm provides the power. Its rack and pinion fence rails make fence adjustments fast, smooth and accurate. This table saw is compact and that makes it portable and easy to transport.








        What We Like:

  • Rip Capacity of 24.5 Inches
  • 15 Amp Motor
  • 5,800 RPM








3. Rockwell RK7323 Table Saw

The Rockwell RK7323 features a speed of 3000/min and a stroke length of 3/4 inches with 5.5 amps of power. You can work with wider materials thanks to its hold-down guard and splitter. This table saw also features a large rip fence that provides more control and accurate cuts.

The Rockwell RK7323 makes miter cuts from 0 to 60 degrees for a good range of projects. It also features a standard guard and riving knife system that gives you the flexibility and performance of larger table saws. Weighing only 15 pounds, the Rockwell RK7323 is portable and be carried wherever you work.








          What We Like:

  • Speed of 3000/min
  • Stroke Length of 3/4 Inches
  • 5.5 Amps
  • Miter Cuts From 0 to 60 Degrees
  • 15 Pounds
  • Standard Guard & Riving Knife System









4. SKILSAW SPT99-11 Table Saw

The SKILSAW SPT99-11 features a 3-5/8-inch depth of cut and 30-1/2-inch rip capacity that allows it to handle materials without it slowing down. Its rack and pinion fence system makes quick and smooth fence adjustments for accurate cuts. This 10-inch heavy-duty worm drive table saw rips through wood easily thanks to its superior torque.

With its 15 amp dual-field motor, the SKILSAW SPT99-11 keeps the motor cool while it makes continuous cuts and ripping through full sheets of plywood and 4x material. WIth 16 inch wheels, the stand can work on uneven surfaces, rollover stairs go put into the back of a truck easily.








         What We Like:

  • 3-5/8-inch Depth of Cut
  • 30-1/2-inch Rip Capacity
  • 15 Amp Dual-Field Motor










5. SKIL Table Saw TS6307-00

The SKIL TS6307-00 features a 15 amp motor that easily rips through hardwood. Its rack and pinion fence rails make fast and accurate fence adjustments. It also features a bevel capacity of 0 to 45 degrees. Moreover, its quick-release lever allows for cuts between two positive stops at 0 and 45 degrees.

With its 4×4 cutting capacity, you get swift 90-degree cutting. The TS6307-00 features a 25-1/2-inch rip capacity. This SKIL TS6307 00 table saw features a 10 inch, 24-tooth carbide blade. Its parallel blade alignment provides easy blade adjustment along the rip fence and miter slot for more precise cuts.







        What We Like:

  • Bevel Capacity of 0 to 45 Degrees
  • 25-1/2-inch Rip Capacity
  • 15 Amp Motor











6. WORX WX572L Tabletop Saw

The WORX WX572L features a no-load speed of 3000/min and a stroke length of 3/4 inches to comfortably complete many projects. Its rack and pinion fence system provides fast, smooth, and accurate cuts. This table saw make miter cuts from 0 to 60 degrees both left and right. It cuts a variety of larger shelving and trim materials.

Weighing about 15 pounds, this tabletop saw is lightweight and compact that it can be carried anywhere and quickly set up. It prevents accidental starts with a safety switch.








       What We Like:

  • Speed of 3000/min
  • Stroke Length of 3/4 Inches
  • Miter Cuts from 0 to 60 Degrees
  • Lightweight & Compact










7. Bosch Power Tools 4100-10 Tablesaw

The Bosch 4100-10 has a powerful 15 amp motor with a speed of 3,600 rpm that delivers 4.0 maximum horsepower for rip-cutting and cross-cutting. This table saw features soft-start circuitry that smoothly ramps up to the operating speed. With its smart guard system, it features a riving knife and anti-kickback pawls that provide protection while the guard assembly provides a barrier to help prevent blade contact.






        What We Like:

  • Speed of 3,600 RPM
  • 15 Amp Motor
  • Soft Start Circuitry
  • Smart Guard System









8. Goplus Table Saw

The Goplus table saw features a 15 amp motor and delivers a speed of 5,000 rpm that rips through hardwood. It has a 26-inch rip capacity with a 36T carbide-tipped blade. It also features double bevel cutting from 0 to 45 degrees and cross-cutting at 90°–3 inches and bevel cut at 45°–2-1/2 inches. The Goplus table saw has a sliding meter gauge that easily adjusts from -45 to 45 degrees for cutting.









          What We Like:

  • 15 Amp Motor
  • Speed of 5,000 RPM
  • 26 Inch Rip Capacity
  • Double Bevel Cutting
  • Sliding Meter Gauge









9. BOSCH Table Saw 4100XC-10

The BOSCH 4100XC-10 features a 15 amp motor with 4.0 max horsepower and a speed of 3,650 rpm for rip-cutting and cross-cutting. Its soft-start circuitry handles the start-up and reduces the chances of tripping the circuit breaker. Its smart guard system provides protection and the guard assembly provides a barrier to prevent blade contact.








          What We Like:

  • Smart Guard System
  • Soft-Start Circuitry
  • Speed of 3,650 RPM











10. RAGE5-S Table Saw

The RAGE5-S table saw has a 15 amp hi-torque motor that cuts through up to 1/4 inch of mild steel. This table saw also has a bevel capacity of zero to 45 degrees. It delivers 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel.

The RAGE5-S table saw has a collapsible frame with wheels that makes it easy to transport the table saw as well as store it. Its parallel fence with a measuring rail guide provides reliable square cutting. This table saw has left and right built-in extensions that support wide work-pieces with a table surface area of 47-1/4 x 25-3/16-inch when fully extended.







         What We Like:

  • 15 Amp Hi-Torque Motor
  • Bevel Capacity of Zero to 45 Degrees









What To Look For In A Table Saw?

1. Table Space

One factor to consider when choosing a table saw is its tablespace. This space determines the size of the wood that you can safely cut. Smaller portable saws are usually around 19 x 22 inches while that of a professional will most likely be bigger.







2. Extension Tables

The extension table is not one of the most important features to consider but you should verify if the table saw you want to purchase is designed so that you can add an extension table if you need one.








3. Rip Capacity

Rip capacity is one of the important features to consider when you choose a table saw. It refers to the distance between the blade and the fence. The more distance present, the larger the board that can be ripped. How much rip capacity you need for a table saw depends on the type of wood that will be cut on the table saw.








4. Blade Size

The blade size is an important factor to consider when choosing a table saw. You can find blade sizes of 8, 10, 12, and 14 inches. You may use a blade size smaller than what is rated for your table saw, but never you a blade size that is bigger than what your table saw is rated for.








5. Cut Depth

The cut depth that a table saw makes is determined by the size of the blade. The rule of thumb is that a 10-inch blade can cut through about 3 inches of wood while a 12-inch blade can cut about 4 inches deep. It is also worth remembering that how a table saw is built will have an impact on the cut depth.








6. Dust Collection

Most of the new models of table saws today are designed with some dust collection features. If you will primarily be using the table saw outdoors then it is not as important as if you will use it indoors. But a dust collection feature will still help as there are more studies that show a link between sawdust and lung and nasal issues.







7. Fence Options

The fence is one of the important features of a table saw. T slot fences are some of the best ones on the market. They slide along the T slot rails on the front and backside of the saw.






8. Blade Guard

The blade guard is an important safety feature of the table saw to consider when you choose one. It is placed over the blade to protect the user from moving their hands or fingers into the spinning blade. The newer models of table saws are designed so that the blade guard can be removed and reattached easily.






9. Riving Knife

The riving knife is another important safety feature of the table saw. It actually prevents the wood from moving towards another piece after being cut. It is good to verify that the table saw you want to purchase comes with a riving knife. Most of the newer models come with a riving knife.








10. Power

The power of the table saw is another factor to consider and how much power you need depends on the types of projects you will undertake. Power is measured in amps and horsepower for table saws. Generally, the more the amps or horsepower, the more power the table saw produces.







11. Size

There are two main sizes of table saws – 10-inch and 8-1/4-inch table saws. The difference between the two sizes is how deeply you cut in a single pass. With a 10-inch table saw, you can cut with a maximum depth of 3-1/2 inches at 90 degrees and 2-1/4 inches at 45 degrees. An 8-1/4 inch table saw will cut about 2-1/5 inches of maximum depth at 90 degrees and 1-3/4 inches at 45 degrees.








12. Rip Fence Quality

When choosing a table saw, it is important to consider how stable the fence locks and how good are the adjustments that it can make. You can either bolt the fence directly onto the table on a rack and pinion or with a cam lock. Many newer models use the cam lock.







13. Blade RPM

The speed of the saw is another important feature to consider. Many table saws have speeds in the range of 3,000 to 6,000 rpm. It is not always the best option to go with the highest speed. High speed can burn hardwoods or require faster feed rates. On the other hand, lower speeds help get rid of such issues.






14. Dado Stack Capacity

If you will need dados for custom built-ins, then the dado stack capacity should be known. It requires a longer arbor and you can’t use the normal throat plate for it.






15. Miter Gauge

The miter gauge will be of importance if you will make a lot of long miter cuts. If that is the case, then you should make sure the miter gauge is the right one for the types of projects you will do.










Types of Table Saws

1. Bench Table Saw

The Bench Table Saw is compact and lightweight usually about 45 to 60 pounds. It is good for cutting sheet material such as plywood and oriented strand board (OSB), or plastic and aluminum paneling. Bench table saw is cheaper than larger table saws. contractor table saws usually require a dedicated 220v circuit.






2. Contractor Table Saw

Contractor table saw, also called a job site table saw, are portable and usually come with a rolling stand. They are the choice of serious DIYers and professionals. Contractor table saws are heavier than bench table saws and cut sheet material up to 24 inches widthwise.







3. Cabinet Table Saw

Cabinet table saw are found in industrial or professional workshops and trade schools. They are the most expensive option of all the table saws. They can cut plywood, hardwood, and pressure-treated lumber.







4. Hybrid Table Saw

A hybrid table saw is a combination of the cabinet and the contractor table saw. It provides as much power as the contractor saw without needing a dedicated 220-volt circuit.










Table Saw Accessories

1. Pushblock for Table Saws

The table saw push block protects your hands and prevents kickback.








2. Table Saw Dust Collector Bag

The table saw dust collector bag collects sawdust and other particles to keep the air clean and protect you.








The Bottom Line

Table saws are important tools for professionals and DIYers. In this guide, we review some of the best table saws on the market today to provide the information you need to help you choose the best table saw for your projects. We recommend the DEWALT Table Saw (DWE7491RS) as our pick for a table saw.






Leave a Reply

Your email address will not be published.