Disclosure: We may earn commissions if you purchase products after clicking on a link from our site.

Are you looking for the best right-angle drills? Are you a little overwhelmed with the variety of right-angle drills on the market? In this guide, we not only discuss some of the best right angle drills but also the factors to consider when you choose one.




1.  DEWALT Right Angle Drill Tool Only (DCD740B)

The DEWALT right angle drill (DCD740B) features dual speed ranges (0-650/0-2000) rpm that provide you with more flexibility for a wide range of applications. It also features a 3/8″ ratcheting chuck with a deep hex pocket that allows a 2-inch (50 mm) hex bit. You can work in hard-to-reach areas with the Dewalt DCD740B due to its compact front-to-back length of 4.0 inches. Moreover, the multi-grip trigger offers comfort and convenience as you can still access it even if you are in tight spaces.







      What We Like:

  • Dual Speed Ranges
  • 3/8 inch Ratcheting Chuck
  • Multi-Grip Trigger
  • Compact Design









2.  MILWAUKEE’S 2415-20 M12 Right Angle Drill

The MILWAUKEE 2415-20 M12 features 3/8-inch single sleeve ratcheting chuck that offers versatility and grip. It produces 100 inch-pounds of torque in a compact, lightweight design. With its extended paddle switch, you get controlled use in multiple positions. The right-angle drill also features an electronic clutch with 11 settings plus drill mode for total control. You can work in dark areas as built-in LEDs illuminate the work surface and indicate when the clutch is out.







       What We Like:

  • 3/8-Inch Ratcheting Chuck
  • Electronic Clutch With 11 Settings



















3.  Ingersoll Rand W5330 Cordless Right Angle Tool, Tool Only

The Ingersoll Rand W5330 Cordless Right Angle Tool features 180 ft. lbs of reactionless torque in a slim and lightweight design. This design gives you the reach needed for tight spaces while possessing the power to get the job done. 





      What We Like:

  • 180 Ft.-lbs. Of Reactionless Torque
  • Durability
  • Slim-Line Design
  • Super-Duty Nylon Housing










4.  Makita DA3010F Angle Drill

The Makita DA3010F features a powerful 4.0 amp motor. It has a variable speed (0-2,400 rpm) for drilling in a variety of applications. This angle drill also features a built-in clutch designed to prevent gear damage by automatically disengaging gears if the bit binds.

Additionally, the Makita DA3010F also features a paddle switch with a speed-limiting dial that prevents the over-tightening of fasteners. Moreover, the Makita DA3010F has a compact design (10-5/8-inch long and 2-5/8-inch head width) that makes working in tight spaces possible.






      What We Like:

  • Powerful 4.0 Motor
  • Variable Speed (0-2, 400 rpm)








5.  Makita XAD02Z Angle Drill

The Makita XAD02Z features a four-pole motor that produces 121 in-lbs. of torque. It also features a 3/8-inch keyless chuck for quick bit changes. Its variable speed (0-1, 800 rpm) allows this right-angle drill to work with a variety of drilling applications. It is designed to be used in tight spaces with its 3-1/2-inch angle head height and 12-3/8-inch length.







      What We Like:

  • 4-Pole Motor
  • Variable Speed (0-1, 800 rpm)
  • 3/8-inch Keyless Chuck
  • Compact & Ergonomic Design









6.  Ryobi P241 One+ Right Angle Drill

The Ryobi P241 is a compact and powerful right-angle drill with adequate torque and rotational speed for many applications. This angle drill generates 130-inch pounds of torque and 1,100 revolutions per minute. With its onboard magnetic tray, you can use both hands as the tray holds the bits and fasteners.

Additionally, you benefit from a firmer grip and more control of the right-angle drill with its rubberized overgrip. You can also work in dimly lit areas as the LED lightning keeps the work area illuminated.






       What We Like:

  • 130 Inch Pounds Of Torque
  • Compact Design










7.  Makita AD04R1 Right Angle Drill Kit

The Makita AD04R1 generates up to 245 in-lbs. of maximum torque. It features a variable speed (0-1, 100 rpm) for a wide range of drilling and driving applications. The Makita AD04R1 also features a keyless chuck and an easy-to-operate paddle switch. With its built-in LED light, you can work in dark areas. With its rubberized soft grip, you experience comfort while you work with this right-angle drill.







      What We Like:

  • 245 in-lbs.
  • Variable Speed (0-1, 100 rpm)
  • Keyless Chuck















8.  Makita XAD03PT Right Angle Drill Kit

The Makita XAD03PT delivers no-load speeds of 0-350 rpm and 0-1, 400 rpm for maximum efficiency. Its automatic speed change technology adjusts drill speed and torque. This right-angle drill also features an electric brake for maximum productivity. Additionally, it features a built-in clutch that minimizes gear damage by disengaging the gears if the bit binds.








        What We Like:

  • Automatic Speed Change Technology
  • Built-in Clutch
  • Electric Brake










9.  Metabo HPT Right Angle Drill (DN18DSLQ4)

The Metabo DN18DSLQ4 features a 3/8-inch keyless chuck that accepts a wide range of bits. It delivers speeds up to 1, 800 rpm. This right-angle drill also features a variable speed paddle switch that provides comfort and control. With the LED light, the working area is illuminated.







       What We Like:

  • 3/8-inch Keyless Chuck
  • Variable Speed Paddle Switch









10.  Goplus Right Angle Drill

The Goplus right angle drill delivers a torque of 15NM. It also features a 3/8-inch ratcheting chuck that makes it possible to work in tight areas. It also features a variable speed switch that delivers a high speed and torque with increased trigger pressure. With a LED light, you can work in dark areas as the LED light illuminates the workspace.






       What We Like:

  • 15NM Torque
  • 3/8-inch Ratcheting Chuck
  • Variable Speed Switch










What To Look For In A Right Angle Drill?

1.  Corded vs. Cordless

When choosing which right-angle drill to purchase, one of the factors to consider is whether it is cordless or corded. Cordless drills are the favorite for many as they operate by a rechargeable lithium-ion battery and give you the flexibility of not needing an electrical cord and outlet.

Corded drills require an electrical outlet and are not flexible and convenient as cordless drills. They are more powerful and offer a constant and reliable supply of power. Moreover, cordless drills are less expensive than cordless models.









2.  Size & Weight

The purpose of a right-angle drill is to allow you to work in tight spaces. Therefore, its size and weight determine how functional and easy it will be to use. Most are designed to be compact, lightweight, and short in length. This design makes it easy to use in a tight space and with one hand.









3.  Comfort & Grip

Another important factor to consider when choosing a right-angle grip is its grip and comfort. Usually, you will use it one-handed to work in tight spaces. You want a drill that is designed with a good grip that allows you to comfortably and conveniently use the tool. Many are designed with rubberized grips that allow you to have a solid grip when you use them.








4.  Motor Speed

You should know what is the speed of the right angle drill. The motor speed indicates the amount of torque it produces. The motor speed is measured in rotations per minute (rpm) and is usually provided by the manufacturer and is in the user manual.








5.  Battery Life

The battery life of a cordless drill is another important to consider if you are opting for a cordless drill. You want to know how long each individual charge lasts as well a how long the battery will hold a charge before it will need to be replaced. Most cordless drill batteries last for 4 hours on a single charge with intermittent use and will take about 3 hours to recharge.









6.  Attachments & Additional Features

Right angle drills use a variety of attachments and extensions. This ability to use attachments and extensions will allow you to work in small and tight spaces.









7.  Drill Size

Another important factor to consider is the drill size of the right-angle drill. Make sure the drill size is the right one to avoid issues while using the drill bits. Some chucks have a size of 1/4 inch while others have a size of 3/8 inch.










8.  Rotating Force

Some right-angle drills have a 3-speed motor which provides the best rotating force to get the job done. Additionally, come drills feature a multi-speed setting that can help to preserve the life expectancy of the motors.









Types of Right Angle Drills

1.  Stand-Alone Power Tool

Stand-alone power tools come with an electric motor inside and it works as an independent and complete unit.








2.  Tool Attachments

Tool attachments complement existing drills. They can’t work all by themselves.









Right Angle Drill Accessories

1.  Drill Bit Set

This is a complete set of drill bits to help you complete any task.








2.  Right Angle Attachment

This right-angle drill adaptor helps you work in tight spaces.








3.  Right Angle Drill Bit Holder

This bit holder can be connected to an electric drill, a charging drill, or a manual wrench, which can extend to a narrow space where they can not reach, and then twist the screw.





How many lumens do you need to light up a tent?
100 to 200 lumens will light up a camping tent. If you are part of a large group, 200 to 400 lumens will suffice.
How bright is 1000 lumens lantern?
1000 lumens illuminates over 50 feet in every direction.
What should I look for in a camping lantern?
Brightness, light modes, run time, durability, waterproof, drop resistance, battery type, and portability are some features to consider when choosing a camping lantern.
How many lumens should a camping lantern be?
100 lumens will light up your camping tent, but 50 to 75 lumens if you want a more gentle glow.













The Bottom Line

Right angle drills have become a mainstay for contractors and many home DIYers. In this guide, we discussed some of the best right-angle drills on the market to help you choose the right one for your projects. We recommend the DEWALT Right Angle Drill Tool Only (DCD740B) as our top pick for a right-angle drill.









Leave a Reply

Your email address will not be published.